Available licences for zencontrol application controllers
Creation date: 8/22/2024 2:42 PM
Updated: 9/2/2024 2:47 PM
This article outlines the available integrations that are available to add on to a zencontrol application controller. It also outlines which application controllers support which licences as in certain circumstances, it is either not possible or not relevant.
Notes:
| Name | Code | Room Controller | AC PRO & AC3 PRO per Channel |
AC Lite & AC3 Lite per Channel |
| Third Party ECD | zc-dc-ecd | • | • | ✓ |
| Third Party EM | zc-dc-em | ✕ | ✕ | ✓ |
| Third Party Interface | zc-tpi | ✓ | ✓ | ✓ |
| TPI Advanced | zc-tpi-adv | ✕ | ✓ | ✓ |
| Serial TPI | zc-tpi-serial | ✓ | ✓ | ✓ |
| Somfy (SDN) | zc-somfy-sdn | ✕ | ✓ | ✓ |
| Somfy (RTS) | zc-somfy-rts | ✕ | ✓ | ✓ |
| Virtual Switches (each) | zc-vs | ✓ | ✓ | ✓ |
| Bacnet | zc-bacnet | ✓ | ✓ | ✓ |
| Bacnet Inputs | zc-bacnet-ext | ✓ | ✓ | ✓ |
| Bacnet FDR (Server) | zc-bacnet-fdr | ✓ | ✓ | ✓ |
| EDI (Pharos Trigger) | zc-edi | ✓ | ✓ | ✓ |
| Modbus 485 | zc-modbus-485 | ✕ | ✓ | ✓ |
| DMX sACN | zc-dmx-sACN | ✕ | ✓ | ✓ |
| DMX Send | zc-dmx-Tx | ✕ | ✓ | ✓ |
| DMX Receive | zc-dmx-Rx | ✕ | ✓ | ✓ |
| Control 4 | zc-c4 | ✕ | ✓ | ✓ |
| MQTT | zc-mqtt | ✓ | ✓ | ✓ |
| zencontrol onsite | zc-onsite | ✓ | ✓ | ✓ |
1) Third Party ECD and EM licences only apply to Lite controllers as the Pro versions have full support for all third party devices
2) An application controller can support multiple licences that makes use of the RS485 port, but only a single one can be active at a given time
3) Licences can not be applied to controllers after the zencontrol onsite licence has been applied to an application controller
4) A maximum of 16 licences can be enabled on a single controller
5) DMX sACN will require either the DMX Receive or DMX Send licence